• How to make getting in & out of a kayak easy? The YAKport Kayak Launch makes getting in & out of your kayak easy. YAKport kayak launch in use. Launching a kayak. Residential kayak launches available in Wisconsin.
  • YAKport installed on a community dock at a condo complex in Waupaca, Wisconsin.
  • Light Gray YAKport Residential Kayak Launch for sale from Recreational Innovations. We have new kayak launches for sale in Central Wisconsin, Northern Wisconsin, and Southern Wisconsin. We sell nationally online too.
  • YAKport kayak launch for launching a kayak. Home kayak launches for sale in Wisconsin.
  • YAKport with a PaddleBack SUP in Wisconsin.
  • This gray YAKport is installed on a cement seawall using a fixed dock installation kit with 8' poles. Installed in Mauston, Wisconsin at an Airbnb on Castle Rock Lake.
  • Assembled Gray YAKport Kayak Launch Kit with fixed dock kit attached.
  • Kayak launch for sale in Waupaca.
  • This gray YAKport is installed on a cement seawall using a fixed dock installation kit. Underwater there is a cement ledge sticking out about half a foot, so the poles needed to be installed at an angle to properly support the launch.
  • How to make getting in and out of your kayak easier? The YAKport Kayak Launch makes getting in and out of your kayak much easier. Teal kayak in a YAKport.
  • Assembled YAKport Kayak Launch Kit. Grayy YAKport pictured.
  • Roto Grab Bars for the sides and Overhead Assist Rail are included with the YAKport Kit from Recreational Innovations.
  • For installing a YAKport to a Fixed Dock. For installing a YAKport to a Stationary Dock.
  • For installing a YAKport to a Standard or Low Profile Floating Dock, where the top decking on the dock is under 2 feet above the water. (Note: If you have a Connect-A-Dock select the proper kit for your 1000 Series or 2000 Series Dock instead.)
  • For installing a YAKport to a High Profile Floating Dock, where the top decking on the dock is over 2 feet above the water. (Note: If you have a Connect-A-Dock select the proper kit for your 1000 Series or 2000 Series Dock instead.)
  • For installing a YAKport to a 2000 Series Connect-A-Dock.
  • For installing a YAKport to a 1000 Series Connect-A-Dock.
  • Example of how the full Fixed Dock Installation kit works with the dock pole.
  • Floating Dock Installation kit for the YAKport Kayak launch comes with 2 -hardware sets, Mounts, and brackets.
  • Fixed Dock Installation kit for the YAKport Kayak launch comes with 2 -pole holders, hardware sets, and brackets.
1 20

Connect-A-Dock

Gray YAKport Kayak Launch Kit

Gray YAKport Kayak Launch Kit

$1,390.00 USD
$1,535.00 USD $1,390.00 USD
Sale Sold out
Dock Mounting Installation Kits

The YAKport is a floating kayak launch that attaches to a fixed dock, floating dock, seawall, or Connect-A-Dock docks. It also can be setup standing alone with the fixed dock kit. The YAKport's stable cradle, side grab bars, and overhead assist rail make entering and exiting a kayak easier. This gray launch kit fits kayaks, canoes, and paddleboards up to 34 inches wide and includes your choice of mounting kit.

Recreational Innovations offers shoreline delivery, installation services, and pick up in Waupaca area throughout Wisconsin. Freight delivery is available Nationwide in the United States.

The YAKport Kayak Launch greatly improves kayak access for kayakers. The compact and sturdy design makes it great for residential usage.

YAKport - Easy on and off the water.

The YAKport Kayak Launch Kit includes all the accessories you need for the best experience you can get using your YAKport.

The Gray YAKport Kayak Kit includes:
- Gray YAKport Kayak Launch
- Gray Roto Side Grab Bars
- Overhead Assist Rail
- An installation kit of your choice between Fixed Dock Kit, Floating Dock Kit (Low Profile), Floating Dock Kit (High Profile), or Connect-A-Dock brand 1000 series or 2000 series kits.

The roto grab bars on the sides and overhead assist rail above enhance your stability and make getting in and out of your kayak easier and safer.

YAKport can be installed on practically any pier/dock with the installation kits available.

  • The Fixed Dock Installation Kit includes a set of plastic pole connectors and galvanized brackets. During installation the galvanized brackets can be optional if you get the posts augured in deep enough. Please note that for a fixed dock installation, you will need a pair of two dock posts (not included), but are available for purchase if needed.
  • The Floating Dock Installation Kits includes a set of galvanized hinges and brackets used to connect the YAKport to a floating dock. 
  • The Connect-A-Dock Installation Kits come with Float Connectors for Connect-A-Dock brand docks. There are separate options for the 1000 Series, and 2000 Series docks.

 

Your dock type Mounting kit to select
Stationary or fixed dock Fixed Dock Installation Kit
Fixed dock requiring support poles Fixed Kit with two 6′ or 8′ auger poles
Floating dock under 2′ above the water Low-Profile Floating Dock Kit
Floating dock over 2′ above the water High-Profile Floating Dock Kit
Connect-A-Dock 1000 Series 1000 Series Attachment Kit
Connect-A-Dock 2000 Series 2000 Series Attachment Kit

 

The YAKport provides a safe and stable cradle for boarding and unloading. Simply place your favorite paddle sport vessel on the Kayak Launch and enjoy a sure-footed and stable entry. Then push or pull yourself in your kayak into the water with very little effort. Once your paddling session is over, pull yourself right back onto the YAKport and enjoy the same stability and convenience while getting out. Now you can easily get out and enjoy the water!

To launch a Stand-Up Paddle Board, place the Paddle Board's fins over the edge of the YAKport into the water. Then back out to launch.

 

- YAKport has three connection points on one side and two on the other for different anchoring options for installing to docks.

- YAKport is a floating plastic kayak launch rotomolded from highly durable UV-protected polyethylene.
- The YAKport is made in the USA!

 

YAKport Size:
Outer Dimensions: 48"w x 60"l x 22"h (when fully assembled the Roto Grab Bars add 25"l)
Inside Dimensions: 34"w x 17"h (Max width of watercraft that fits is 34" wide)

 

YAKport Kayak Launch - Frequently Asked Questions

Question Answer
Will YAKport work with my kayak? Paddle sport vessels up to 34” wide will fit inside the YAKport kayak launch. There is no length restriction. You can even launch canoes and paddleboards.
Why does one side of the YAKport have three connection points and the other side have only two? It has different anchoring options: the two-point side is for higher dock systems and the three-point side for lower dock systems.
Can I attach the YAKport to my dock? Yes, the YAKport can attach to virtually any dock style and height with the appropriate floating or fixed dock attachment kits. We offer floating and fixed dock attachment kits for high- and low-profile docks. We also have Connect-A-Dock specific kits if you are planning to attach this to a Connect-A-Dock 1000 series or 2000 series dock. 
Do I need to hire someone to install the YAKport, or can I do it myself? It is easy to install a YAKport, but professional installation by is recommended for safety. Installation by Recreational Innovations is available in Wisconsin!
Do UV rays make the product hot or impact its structure over time? YAKport may warm in direct sun, lighter colors absorb less heat. It’s engineered to resist UV damage and maintain durability.
What kind of maintenance is required? No special maintenance. Clean with a stiff broom and clean water, or a soapy water mixture. Use environmentally safe products.
How do I store my YAKport in the winter? Remove from the water, store flat and right-side-up to avoid ice/water damage. YAKport Winter Storage Tips.
How do you clean it? Clean with a stiff bristle push broom or scrub brush. Use fresh water or an environmentally friendly soap and water mixture to clean your YAKport.
I need replacement parts or hardware. What should I do? Contact Recreational Innovations for customer service via email or phone.
What are the benefits of the roto grab bars and overhead assist? They make it easier to pull/push yourself on/off and provide balance when stepping in/out of the YAKport.
Is all the hardware I need to assemble / install my YAKport included with the order? Basic hardware is included for assembly of the YAKport. For installation additional anchoring hardware (poles, lag bolts, nuts, bolts, washers) may be needed depending on your dock setup and lake bottom type.

 

YAKport Kayak Launch Instructions, Installation, and Winterization Guide Links

 

Manufacturers Warranty for YAKport Kayak Launches in the United States:

  • 8 Years, Polyethylene Plastic Components (residential use)
  • 2 Years, Polyethylene Plastic Components (commercial use)
View full details